Replacement Handles For UPVC Windows

uPVC window handles can break and fall off. Thankfully, replacing them is an easy job if you have the appropriate tools.

Check for the screws or pins that hold it in place to determine the type of handle. Once you've identified them, take off the pins or screws and carefully remove the handle from its spindle.

Espag Handle

Espag handles are the most popular kind of handle you will find on double-glazing uPVC windows. They're flat with a cylindrical shape. They're typically made from uPVC however they can be made of different materials depending on the style and design of your window. The handle also comes in a variety of colors and shapes to complement the decor of your home.

The espag can also be referred to as a spade or cockspur. It's typically found on older uPVC windows and can be used as an alternative for a damaged one. They're not as secure as modern bifold door handles however they do provide a simple locking mechanism. The handle has two studs in the round, known as mushrooms, which move upwards and downwards when the handle is turned. They are anchored to a metal plate called a keep on the frame. The handle can also be found in a cranked version that gives you more room to hold and a sleeker look or an inline version that some prefer.

These types of uPVC window handles are typically found on older wooden windows, as well as double-glazed windows. They are typically made of aluminium or uPVC but they can be made from other materials too. Espag window external door handles can be locked using a key or by using wedge blocks that go between the frame and the handle. They are also easy to maintain and you can purchase replacement parts should they break.

You should verify the size of the spindle on the back of your handle prior to selecting the correct espag handle. This should be a maximum of 7mm in diameter. Also, you must measure the height of the step where the handle will fit on the window frame. If you select the correct handle size your window will be closed with a tight seal.

Monkey tail handles are a wonderful choice for older windows. They are also suitable for contemporary window styles and are available in left- or right-handed versions. They feature a stylish design with a reeded finish and a slim backplate to fit inside the frame of the window. These handles are also lockable and come with a decent step height.

Venetian patio door handle

There are many different styles to choose from when replacing window handles made of upvc. There are Espag handles, Cockspur handles, spade or blade handles as well as tilt and turn handles. The kind of handle you choose will depend on the type of windows you have as well as your personal preferences. Take into consideration the size of the handles and the spindle. It is essential to make sure that the new handle will fit into the screw holes and has the proper spindle length.

The cockspur handle on windows made of upvc is among of the most popular styles. They are available in a range of finishes and colors. They are also available in non-locking and locking window handles models. The main distinction between the two is that a cockspur handle is able to be locked using a key. The keyed version is typically used for properties with high security and is more secure than the traditional handle.

Venetian handles are usually secured by two bolts, similar to Espagnolette handles. They are a little recessed from the frame, which means that they won't poke through blinds, like other window handle types could. These handles are ideal for apartments with high rises because they are easily cleaned from the inside. These window handles are an excellent choice to consider if you're in search of a stylish and functional replacement for your upvc windows.

Regardless of the design of the window you have, there's an appropriate handle for it. When you're selecting a replacement handle for your upvc window be sure to consider the dimensions and shapes of the screw holes, the height of the step and spindle length, as well as the handling. The handle must be able to support the weight of the window when it's closed.

A tilt and turn handle is a great option for windows made of upvc that open from the side. It serves a dual purpose and allows you to tilt and turn windows, which is great for ventilation, cleaning and security. It's also simple to operate, even using only one hand. The handle can be used to lock the window in a wide open position, or it can be tilted to enjoy the fresh air without worrying about whether burglars could break in.

Pear Drop Handle

If you find that your uPVC window handle or lock is damaged, you'll probably be looking to replace it with a similar model. This is a relatively simple task that can be accomplished by yourself. First, ensure that your window is shut, then take out the screw that is at the base of the handle. After you have removed the two screws the handle will slide off. The multipoint lock can be removed by removing two screws. When the new handle is ready, simply screw it back to its original position. If the handle has a a screw cap you must also replace it.

Espagnolette handles are most commonly employed on uPVC window frames. Recognised by their flat-strip shape, they work together with multipoint locks secured around the frame to provide the highest levels of security for your home. They can open either left or right, and are available in a range of colors.

Cockspur handles have a more traditional look. They are popular for heritage improvements, and for those who like an appearance that is more traditional. They have a shaft that runs through the handle into the gearbox. This turns a series of shootbolt rods to secure the window.

Pear drop handles are a more contemporary option than cockspur handle styles and offer a similar level of security. These handles are an excellent choice for those who want to update their windows while still keeping the historical style of their home.

The Cornish Heritage Tear Drop Espag handle is a tribute to 19th Century Ironmongery. It is perfect for windows with a heritage style and will give your home a classy exterior. This handle is compatible with the tear drop operating stay and dummy stays to make an entire window that is reminiscent of the heritage.

Choosing the right replacement handle for uPVC window can be a challenge. Our easy guide and useful tips will help you achieve the best results. Bridgewater Glass can help you upgrade your entire window set, or replace your existing uPVC lock and handle.

Handle that is tilted and turns

Tilt and turn handles are found on double-glazed windows that open inwards and tilted back or down for ventilation. The handle is rotated, and a locking mechanism is activated when the window is tilted in either direction. These windows are extremely popular in Europe. They provide better airflow, and are safer. When replacing a uPVC tilt and turn handle, the new one must be compatible with the window style and locking mechanism to ensure security and functionality.

Tilt-and-turn windows are usually constructed from uPVC, aluminum or timber frames. Timber frames can be used by homeowners who prefer a more traditional feel and style to their home. uPVC frames are the most affordable option and offer excellent durability as well as energy efficiency and minimal maintenance needs. Aluminum frames, on the other hand are a more expensive option, but offer superior strength and corrosion resistance.

The uPVC handle tilts and turns in a similar manner as an espagnolette, however it is more heavy and bulkier due to the fact that it is fitted to larger windows. They are also more durable due to the fact that they are able to withstand more forces when the window opens inwards or tilted.

The most important thing to consider when replacing a tilt-and-turn handle is that it can be locked into one of four positions. This prevents the window from opening all the way to the room. It is possible to do this with a lock key. This is especially helpful when there are small children in the area, since it keeps them from opening the windows too far.

The majority of tilt-and-turn window handles have this feature included as standard. Cheap Chinese products are the exception. Sealco Scotland stock a wide assortment of premium tilt and turn handles from brands like Hoppe, Trojan, and Sensei.

It is essential to measure the handle you have before you purchase a tilt-and-turn handle. This will help you identify the appropriate design. You'll need to measure the distance between the screw fixing holes that are typically 43mm centre to centre. You may need to remove the cover caps or the backplates that are sprung loaded from certain handles in order to reveal the screw positions.